The Thermomix TM31 has been and is one of the best-selling models by Vorwerk, the company behind the kitchen robot. By market share, it is also one of the models that have reported the highest number of errors throughout its short history. As usual, errors are issued through the robot’s screen in the form of messages and codes. On this occasion, we have compiled the list of errors and messages of the Thermomix TM31, as well as the solution to each device’s problems.
SOLUTION TO ERROR — OF THE THERMOMIX TM31
We removed the food from the scale just at the measurement time. The solution is to set the scale to 0 to re-weigh the food.
SOLUTION TO ERROR 22 OF THE THERMOMIX TM31
It is usually related to the robot’s power supply system. If the message appears repeatedly, we will have to go to customer service to proceed with its repair.
SOLUTION TO ERROR 23 OF THE THERMOMIX TM31
It is related to a problem with the container of the Thermomix. The solution is to disconnect and reconnect the plug to force the system to restart. It is also recommended to clean the glass contacts properly.
If the message persists, we must repair the glass or change it to a new one.
SOLUTION TO ERROR 26 AND ERROR 32 OF THE THERMOMIX TM31
It appears when the electrical current voltage is low due to a lack of power or a defective wall socket. If the message appears repeatedly, we must repair the robot at the Vorwerk technical service.
SOLUTION TO ERROR 27, ERROR 28, ERROR 30, AND ERROR 31 OF THE THERMOMIX TM31
This is a Thermomix TM31 hardware error. The only solution is to repair the robot in the technical service if the messages appear repeatedly, either with different codes or the same error code.
SOLUTION TO ERROR 34 OF THE THERMOMIX TM31
Indicates that the robot motor has an overload. It may be due to excess food stored in the container. It may also be related to blocking the blade by food remains or consistent pieces of food. The solution is as simple as reducing the food in the bowl or cleaning the blade of food residue.
SOLUTION TO ERROR 35, ERROR 36, AND ERROR 37 OF THE THERMOMIX TM31
If the message appears frequently, we must take the robot to the official Vorwerk technical service for repair.
SOLUTION TO ERROR 38 AND ERROR 39 OF THE THERMOMIX TM31
It is usually related to a hardware problem on the robot. We can try to disconnect and connect the plug to force its restart. If the messages persist, we must contact the official technical service.
SOLUTION TO ERROR 52 OF THE THERMOMIX TM31
It is a problem related to the container glass. It appears when very cold or frozen food has been introduced into the glass. If we have kept the glass in the fridge, the error will likely persist until the temperature rises to the minimum limit supported by the robot.
The brand recommends washing the glass with hot water and processing frozen or very cold foods quickly to prevent the temperature of the glass from dropping. We can also try to clean the glass contacts to remove any element hindering food processing.
SOLUTION TO ERROR 53 OF THE THERMOMIX TM31
This problem is derived from a bad connection with the glass contacts. We will have to clean the glass contacts to make the warning disappear.
SOLUTION TO ERROR 55 OF THE THERMOMIX TM31
Problems with the scale of the robot. If the message appears repeatedly, we must use the Vorwerk technical service.
SOLUTION TO ERROR 58, ERROR 59, ERROR 60, AND ERROR 61 OF THE THERMOMIX TM31
This is a general hardware problem whose only solution is to go to the Thermomix technical service.
SOLUTION TO ERROR 67 OF THE THERMOMIX TM31
Robot scale failure. There is no solution, so we must call the technical service if the message persists for several days.
SOLUTION TO ERROR 68 OF THE THERMOMIX TM31
It is related to a general hardware issue. We must go to the company’s technical service to find a personalized solution.
SOLUTION TO ERROR 69 OF THE THERMOMIX TM31
It usually appears when the food processor experiences overheating problems. If the message appears repeatedly, we must resort to the technical service.
SOLUTION TO ERROR 70 OF THE THERMOMIX TM31
This is a general problem with the Thermomix TM31 hardware. Vorwerk recommends disconnecting and reconnecting the plug to force restart the device.
SOLUTION TO ERROR 72 OF THE THERMOMIX TM31
It corresponds to a general problem with the robot components. We must go to the technical service to give it a solution.
SOLUTION TO ERROR LOAD OF THE THERMOMIX TM31
The jar is overloaded or overheated. We must wait for the motor to cool down or reduce the food stored in the glass.
SOLUTION TO OPEN ERROR OF THE THERMOMIX TM31
The robot speed selector is not in the open position. We will have to turn the selector to the OPEN position to eliminate the warning.
SOLUTION TO ERROR 8888 OF THE THERMOMIX TM31
The value of the weight registered by the scale is outside the range allowed by the system. The brand recommends setting the scale to 0 and immediately reducing the weight of the food. It is also recommended to check the posts that support the scale.
SOLUTION TO ERROR OULD OF THE THERMOMIX TM31
A problem is very similar to message 8888. The solution is to reduce the food’s weight and control the scale’s feet. If the problem persists, you have likely suffered damage.
SOLUTION TO ERROR 0 OF THE THERMOMIX TM31
Same error as the previous two. We will have to reduce the weight of the food or check the state of the feet.
I am a writer with eight years of experience writing in business and technology. I always carry a passion for learning and discovering new knowledge.